Geographic Information Systems, ADS-B protocol | ASTERIX CAT62 protocol
3
5
This work, analyses, designs and implements an application that depicts the airplane positions around a selected point of interest on a digital map and alerts the user in case of proximity to a preselected limit. The system processes incoming Aircraft traffic data and displays them on a map system. Based on a default point of interest, it will show alerts for the Aircrafts that are less than this limit. Implementation required real-time in-flight data from Aircraft using the ADS-B communication protocol. Data is downloaded via an ADS-B receiver with UHF antenna. The receiver can send ADS-B data over Wi-Fi and TCP / IP or UDP. The application has the capability of communicating with the receiver, receiving the ADS-B data packets, decoding them and displaying them. The user has the ability to create an area of interest where, if an aircraft comes in, the application warns the user with an alarm. The application further translates incoming ADS-B messages into ASTERIX CAT62 messages that can be sent to other applications via network.
Στην εργασία αυτή γίνεται ανάλυση, σχεδίαση και υλοποίηση εφαρμογής που απεικονίζει σε ψηφιακό χάρτη τις θέσεις Αεροσκαφών γύρω από επιλεγμένο σημείο ενδιαφέροντος και ειδοποιεί το χρήστη σε περίπτωση προσέγγισης πέραν προεπιλεγμένου ορίου. Το σύστημα επεξεργάζεται εισερχόμενα δεδομένα της κίνησης Αεροσκαφών και τα απεικονίζει σε σύστημα χάρτη. Με βάση προεπιλεγμένο σημείο ενδιαφέροντος παρουσιάζει ειδοποιήσεις για τα Αεροσκάφη που βρίσκονται σε απόσταση μικρότερη από αυτό το όριο. Για την υλοποίηση της απαιτήθηκε η, σε πραγματικό χρόνο, λήψη δεδομένων από εν πτήση Αεροσκάφη αξιοποιώντας το πρωτόκολλο επικοινωνίας ADS-B. Η λήψη των δεδομένων γίνεται μέσω ενός δέκτη ADS-B με UHF κεραία. Ο δέκτης έχει τη δυνατότητα αποστολής δεδομένων ADS-B μέσω Wi-Fi και TCP/IP ή UDP. Η εφαρμογή έχει τη δυνατότητα να επικοινωνεί δικτυακά με τον δέκτη, να λαμβάνει τα πακέτα των ADS-B δεδομένων, να τα αποκωδικοποιεί και να τα απεικονίζει. Ο χρήστης έχει τη δυνατότητα να δημιουργήσει περιοχή ενδιαφέροντος στην οποία, όποιο αεροσκάφος μπει μέσα, προειδοποιεί τον χρήστη με συναγερμό. Η εφαρμογή επιπλέον «μεταφράζει» τα εισερχόμενα ADS-B μηνύματα σε ASTERIX CAT62 μηνύματα τα οποία μπορεί να στείλει δικτυακά σε άλλες εφαρμογές με σκοπό τη περαιτέρω αξιοποίηση των λαμβανόμενων πληροφοριών του συστήματός μας από άλλα συστήματα τα οποία δεν έχουν τη δυνατότητα λήψης μηνυμάτων ADS-B.
This work, analyses, designs and implements an application that depicts the airplane positions around a selected point of interest on a digital map and alerts the user in case of proximity to a preselected limit. The system processes incoming Aircraft traffic data and displays them on a map system. Based on a default point of interest, it will show alerts for the Aircrafts that are less than this limit. Implementation required real-time in-flight data from Aircraft using the ADS-B communication protocol. Data is downloaded via an ADS-B receiver with UHF antenna. The receiver can send ADS-B data over Wi-Fi and TCP / IP or UDP. The application has the capability of communicating with the receiver, receiving the ADS-B data packets, decoding them and displaying them. The user has the ability to create an area of interest where, if an aircraft comes in, the application warns the user with an alarm. The application further translates incoming ADS-B messages into ASTERIX CAT62 messages that can be sent to other applications via network.