ΣΕΙΣΜΙΚΗ ΑΠΟΤΙΜΗΣΗ ΥΦΙΣΤΑΜΕΝΟΥ ΚΤΙΡΙΟΥ ΑΠΟ ΟΠΛΙΣΜΕΝΟ ΣΚΥΡΟΔΕΜΑ ΜΕ ΜΗ-ΓΡΑΜΜΙΚΕΣ ΣΤΑΤΙΚΕΣ ΑΝΑΛΥΣΕΙΣ ΚΑΙ ΔΙΕΡΕΥΝΗΣΗ ΕΝΑΛΛΑΚΤΙΚΩΝ ΜΕΘΟΔΩΝ ΕΝΙΣΧΥΣΗΣ ΜΕ ΣΤΟΧΟ ΤΗΝ ΠΡΟΣΘΗΚΗ ΟΡΟΦΟΥ
Σκοπός της διπλωματικής εργασίας είναι να διερευνηθεί το πρακτικό πρόβλημα της απαίτησης για ενίσχυση ενός υφιστάμενου κτιρίου, σχεδιασμένου με παλαιούς κανονισμούς, όταν πρόκειται να γίνει σε αυτό προσθήκη καθ’ ύψος. Στις περιπτώσεις αυτές, ακόμα και η πρόβλεψη ορόφου κατά το σχεδιασμό του κτιρίου πιθανόν να μην αρκεί για να καλύψει τις σύγχρονες απαιτήσεις. Ως εκ τούτου είναι απαραίτητο να διερευνηθεί η σεισμική ικανότητα του κτιρίου και ακολούθως να αξιολογηθούν τα διαθέσιμα μέτρα επέμβασης προκειμένου να είναι εφικτή η προσθήκη του νέου ορόφου.
Στο πρώτο κεφάλαιο γίνεται παρουσίαση του φορέα. Καθορίζονται οι ιδιότητες των υλικών (υφιστάμενων και ενίσχυσης), τα χαρακτηριστικά των διατομών (διαστάσεις και οπλισμός) καθώς και τα κανονιστικά πλαίσια που ακολουθήθηκαν.
Στο δεύτερο κεφάλαιο παρουσιάζεται η προσομοίωση του φορέα στο πρόγραμμα SAP2000. Γίνεται παρουσίαση των παραδοχών που διατυπώθηκαν, τα φορτία στα οποία υποβλήθηκε ο φορέας και οι συνδυασμοί φόρτισης.
Στο τρίτο κεφάλαιο παρουσιάζονται και σχολιάζονται τα αποτελέσματα οι δύο ελαστικών μεθόδων ανάλυσης (Απλοποιημένη Φασματική Μέθοδος και Δυναμική Φασματική Μέθοδος).
Στο τέταρτο κεφάλαιο παρουσιάζονται και αναλύονται τα αποτελέσματα της ανελαστικής στατικής μεθόδου ανάλυσης, που αποτέλεσε και την κύρια διαδικασία αποτίμησης του υπό μελέτη κτιρίου. Συγκεκριμένα, προσδιορίζεται το σημείο επιτελεστικότητας και παρουσιάζονται σχηματικά οι θέσεις των πλαστικών αρθρώσεωνγια συγκεκριμένους συνδυασμούς φόρτισης.
Στο πέμπτο κεφάλαιο παρουσιάζονται οι διάφορες μέθοδοι ενίσχυσης που επιλέχθηκαν και αποτελέσματα που αφορούν τη συμπεριφορά του ενισχυμένου φορέα.
Τέλος, στο έκτο κεφάλαιο παρουσιάζονται τα συμπεράσματα και οι προτάσεις για περεταίρω έρευνα.
Purpose of this thesis is to investigate the practical problem for retrofitting demand of an existing building, which is designed with the old regulations and in which an additional story is to be build. In these cases, even if the additional story was calculated during the design of the building, that isn’t enough in order to fulfill the newest demands of the regulations. Thus, it is necessary to investigate the seismic performance ability of the building and after that to assess the available means of intervention in order to be applicable the addition of the story.
In the first chapter, the building is presented. Material properties are defined (existing and added), section properties (dimensions and rebar) and the regulations that are taken into consideration.
In the second chapter the simulation in SAP2000 analysis program is presented. Also the assumptions that were taken into consideration, the applied loads and the load combinations are presented.
In the third chapter the two elastic analysis methods are presented and their results.
In the fourth chapter the inelastic static analysis is presented. The acceptance criteria is determined and the simulated building with its plastic hinges. At the end the results are presented for certain load combinations.
In the fifth chapter, different methods of retrofitting are presented with the results of the retrofitted building.
In the sixth chapter the conclusions are presented and the suggestions for further investigation also.
Items in Apothesis are protected by copyright, with all rights reserved, unless otherwise indicated.
Κύρια Αρχεία Διατριβής
ΣΕΙΣΜΙΚΗ ΑΠΟΤΙΜΗΣΗ ΥΦΙΣΤΑΜΕΝΟΥ ΚΤΙΡΙΟΥ ΑΠΟ ΟΠΛΙΣΜΕΝΟ ΣΚΥΡΟΔΕΜΑ ΜΕ ΜΗ-ΓΡΑΜΜΙΚΕΣ ΣΤΑΤΙΚΕΣ ΑΝΑΛΥΣΕΙΣ ΚΑΙ ΔΙΕΡΕΥΝΗΣΗ ΕΝΑΛΛΑΚΤΙΚΩΝ ΜΕΘΟΔΩΝ ΕΝΙΣΧΥΣΗΣ ΜΕ ΣΤΟΧΟ ΤΗΝ ΠΡΟΣΘΗΚΗ ΟΡΟΦΟΥ Περιγραφή: Διπλωματικη Εργασια Ηλιας Δημας.pdf (pdf)
Book Reader Πληροφορίες: Κυρίως σώμα διπλωματικής Μέγεθος: 4.5 MB
ΣΕΙΣΜΙΚΗ ΑΠΟΤΙΜΗΣΗ ΥΦΙΣΤΑΜΕΝΟΥ ΚΤΙΡΙΟΥ ΑΠΟ ΟΠΛΙΣΜΕΝΟ ΣΚΥΡΟΔΕΜΑ ΜΕ ΜΗ-ΓΡΑΜΜΙΚΕΣ ΣΤΑΤΙΚΕΣ ΑΝΑΛΥΣΕΙΣ ΚΑΙ ΔΙΕΡΕΥΝΗΣΗ ΕΝΑΛΛΑΚΤΙΚΩΝ ΜΕΘΟΔΩΝ ΕΝΙΣΧΥΣΗΣ ΜΕ ΣΤΟΧΟ ΤΗΝ ΠΡΟΣΘΗΚΗ ΟΡΟΦΟΥ - Identifier: 73918
Internal display of the 73918 entity interconnections (Node labels correspond to identifiers)